“Canceled” is a term assholes came up with to rebrand “consequences” to make it seem like something that isn’t their own fault.
Not sure I agree with this particular take. My recollection is that this usage of cancelled started in progressive internet spaces and was absolutely used to describe consequences for being an asshole.
It’s the exact same trajectory woke took – it was language used by left-leaning people that got co-opted and intentionally diluted by conservatives.
This AI ruling is also actually completely in-line with existing precedent from the photography world.
The US Copyright Office has previously ruled that a photograph taken by a non-human (in this case, a monkey) is not copyrightable:
https://en.wikipedia.org/wiki/Monkey_selfie_copyright_dispute
That’s a really great point and another reason I’ve really enjoyed the Garmin experience – Garmin doesn’t try to sell your own data back to you.
Getting anything more than the absolute most basic of real time data out of a Fitbit requires an annual subscription. With Garmin, it’s just there.
Fitbit is owned by Google and has the same policy of not repairing cracked screens.
I owned a Sense 2 and was in a bicycle crash. Screen hit the pavement and shattered. Absolutely no options from Fitibit/Google to get it repaired.
I switched to Garmin and couldn’t be happier.
Something like a body panel is going to expand/contract a couple of orders of magnitude more than 10 microns just from the weather changing day-to-day.
It’s SEO-optimization nonsense.
With that price I feel like the dev has 0 faith in lemmy getting very big
It feels kind of the opposite to me.
Going back and checking my Google account history, I paid $1 for Sync Pro. In 2012. And was using it up until last month. In retrospect, that was far too low a price for the utility I got out of the app for literally years.
If anything, it feels like the dev has learned that lesson and has priced the lifetime option where it’s actually sustainable for them if Lemmy stays around.
It’s why all the appeals to “what would Aaron think” with the whole API thing were really off the mark.
spez and kn0thing were college buddies. Swartz was kind of pushed onto them by YC. I’ve never had the impression that they felt any particular attachment to him; he was a business partner that became involved at the behest of the people funding them, who left in the first couple of years.
That’s inconsistent extrusion.
As others have mentioned, the first thing I’d look at is thoroughly drying the filament. TPU is very hygroscopic and will become nearly unprintable within a couple of days of coming out of the dryer.
Beyond that, you may be trying to run it faster than your hotend can melt it. TPU is pretty resistant to melt and cranking temp doesn’t help a whole lot. Actual flow can vary pretty wildly between brands depending on their exact blend but I’ve seen TPUs that refuse to flow more than around 2mm³/s through a standard 0.4 nozzle. (Volumetric flow is roughly layer height * width * linear speed).
A 2.4 will be better than an Ender 3, but there are better options out there. The flying gantry is a solution in search of a problem, the gantry is heavy and not particularly rigid, Voron toolheads don’t cool particularly well, the rigid bed mounting is a recipe for bed taco, etc.
Which isn’t to say that V2s are bad printers – they can turn out great prints. But if you’re starting fresh today, I’d seriously consider any number of printers over it.
If you want to stay within the Voron ecosystem for whatever reason, the Trident’s a better design. It still lacks things like kinematic bed mounting that are standard fair on other designs today, though. I’d stay away from Tap on any of them – I’m still baffled that thing gets promoted as being a good idea.
In terms of bang for your buck, it’s incredibly difficult to beat the VzBot kits. It’ll be a less expensive and more capable machine than a V2.4. There are panels available to enclose it. I don’t love the Z stage on it, but I can overlook it given the value the rest of the printer gets you.
The Annex K3 is an absolutely killer little machine, but is only 180x180 build volume. The small build volume is free rigidity, though, and K3s can be made true high temp capable with less relative effort than a lot of printers. I’m not as big a fan of the larger Annex printers (K1/K2), personally.
The Rat Rig v-Core was probably the best value CoreXY before the VzBot kits came around. Enclosing them is more of a challenge due to all the PETG parts, though. The EVA toolhead provides a ton of flexibility for mixing and matching parts, if that’s your thing.
In terms of take it out of the box and print, nothing beats the Bambu X1 and P1P. They’re great units. They’re a closed ecosystem though, and not modification friendly if that’s what you want.
My main workhorse printer’s a Railcore II. Great machine, but the design’s aging and I generally wouldn’t recommend a new build today outside of a few very specific applications. It was cutting edge when the design was released in 2018, but, as with the 2.4, the wider community has learned a lot since then about fundamental printer design and there are better options now.
The transmission in those things is an amazing level of suck, too. It’s this bizarre automatic manual thing that’s just awful to drive.