Also, I think that mirrors the marketshare of devices used to browse the Internet. More and more phones, less and less computers.
Also, I think that mirrors the marketshare of devices used to browse the Internet. More and more phones, less and less computers.
It’s way more exhaustive actually ! https://books.google.fr/books?id=7mWeBQAAQBAJ&pg=PA97&hl=fr&source=gbs_selected_pages&cad=1#v=onepage&q&f=false
From my point of view : it has a hudge ecosystem with tons of robust libraries. This does not make it perfect, but for an industrial point of view, you don’t look for new shiny clean things. (My point of view is 15 years old yet…)
24 (TV series) is like this if I remember well. The daughter would have had a cellphone now.
I just measured it and the overhang behind is half the bed and half the infamous cable. You need around 60cm between the front feet and the wall behind, for the cable not to be torn when the bed is all the way to the back.
The bed goes back and forth. On the back, you need the place since there is the infamous cable that should not be torn. On the front, the bed can go over the void. There is no need for a 70 cm large table, maybe 50cm with overhang.
It’s a mess. I have the A1 with AMS and it takes way more space than I wanted. The coreX with AMS are way more compact.
Edit.
Wide 80cm (with the poop chute on the left and the AMS on the right)
Depth 70cm (with all the cables and the bed going back and forth)
Height 60cm with the top roll
I would like to get one for our club but I can’t understand the wide variety of prices. $150 ? $500 ? $2000 ? $10000 ? $75000!! ? What’s the cheapest that is not a pain to use ?
What slicer is it ? I will check if it is possible to set no purge at all in BambuStudio - since I have an AMS lite.
It looks feasible with a purge multiplier set to 0. https://forum.bambulab.com/t/setting-an-unbeatable-record-no-flush-at-all/51052/4
I say to people : if you’re interested in 3D printing, you need two hobbies. 3D printing and anything else. The second hobby can be repairing things, a sport (spearfishing for me), board games, electronics, etc.
I started with a 100€ very small 3D printer for years (Tina2) and that was so worth it. Now I have a Bambulab with AMS and it’s night and day.
Yes. It breaks points.
I agree with the other comments. Yet, it’s a beautiful design. What software do you use ?
Don’t tell me what to do. Upvoted.
Congratulations ! I usually make 4 or 5 iterations too for each piece, with my least favorite color (toilet paper pink that looked fuchsia on the website). I even launch a print and during the printing I correct my model based on the n-2 print.
There are some of these pumps in France. It infuriates me. The sound is horrible.
Harry Plotter ?
“You either die a hero or live long enough to see yourself become the villain”
Nokia has chosen both ways at once.
I have tried nearly everything. Chili powder or black pepper only works until the next dew.
I tried a special spray, it’s useless.
The only thing that worked for me to cover the whole garden was special grains made of wood and black pepper oil. You can throw it around the garden and it last one or two weeks.
For raised planter bed, I put nets originally used to cover trees for birds not to eat the fruits. It can be cut to any size and cats don’t like to walk on it. Some issues :
You are right. How do they still allow plastic bottles ? That’s a huge waste of ressources.
Nice !
I would go with wood filament.