Nvidia shield with a custom launcher. Google updated their Android TV home which made 60% and More of the dashboard just ads so I added projectify as my launcher. There are now only 2 apps being shown on my screen. Plex and Google Play (for updating apps).
It goes even beyond that.
With a dedicated app, you go into the store and install it and then you have it in your apps that you then can place everywhere.
With a website, you need to have the browser, navigate to that website each time. And yes, you could put a link to that website on your home screen as well but not many user are probably aware of that being an option.
I know that but I still would prefer a dedicated app because it is easier to manage and use more features of my phone. For example, I just tried it on my android phone and the link to a website always opened a new tab in my Firefox.
Then I can manage the notifications of that app depending on what I want it to notify me about.
I can’t do that specifically for a single app or website in a browser.
On the other hand, I also wouldn’t want to miss a website because I am not always on my phone and, in some cases, it is way more annoying to do something over the phone because I am just not used to it (like writing this comment). Doing that over a website version that I can access on my PC is much easier and convenient.
Currently listening to “zero hour” from the expeditionary force by Craig Alanson. R.C. Bray is such a great narrator and “Skippy” is always cracking me up.
Probably depends on the background as well. They could have hardware running (multiplayer server) that gets so little activity that there is no benefit and only loses them money.
It also doesn’t look like the game has steam integration.
I would recommend watching the video…
What you say is “easy” is great for a comment on Reddit or Lemmy but it doesn’t really provide anything to the actual problem.
The problem is that a company “just” doesn’t, why would they do this anyway? It would open their IP to be forked, modified and used for something else by someone else. That isn’t what they want you to do.
Since there is no incentive and no one is forcing them to do this they just keep doing whatever they want. It was mentioned in the video that there is absolutely no regulation or anything in that regard available ANYWHERE in the world, not even in the EU.
THIS is what the video and Ross Scott want to achieve, that there either will be regulations for it so that Game developers and Publishers can’t just create games with some mandatory server backend running that is shut down in a couple of years OR that there is at least some way of saying “well, we don’t care” so that the consumer can actually do anything about it on their own end.
So it is easy to say they “just” have to do X or Y but the past and the increasing games relying on things like this have shown that they won’t do anything about it because nothing is stopping them.
Depends. I recently was in that situation and it was easier and more cost-effective to just print them.
I recently bought some Lego Star Wars sets and printed out some Display stands for them but the connection between the stands and the model was expected to be a 2x4 Lego plate. I didn’t have those plates at hand so I looked online and found it from the official Lego site.
The individual “Plate 2x4” would cost 0.14EUR each. Since I needed 3 this would be 0.42EUR. But the mailing costs would be over 9EUR.
So ordering 3 of those Lego pieces would cost me almost 10 bucks. I just printed them out which worked well, they were a bit tight fit but are still holding.
But I wouldn’t necessarily say that this is a replacement for actual Lego pieces. As a quick alternative that you can’t see or that has less interaction with other pieces (doesn’t need to fit correctly on all sides) then I think this can work.
so, sooo much.
I currently print some stands for some Lego spaceships. I also have over a TB of models from various Patreons that I support accumulated over the months. I also always find new ones I want to print, but rarely find the time to ACTUALLY print something, anything…
My neighbour asked me to take a look at her refrigerator because it wasn’t working. I am a software developer.
Unraid “supports” docker compose. You can install and use it but you won’t be able to utilize how unraid handles docker containers.
All that unraid does is make docker more accessible for the normal user. In the end the container template constructs a docker run command.
So you could use portainer to manage stacks through a webui or install compose and have to SSH into the unraid server all the time.
While this would be funny to watch, it wouldn’t help Linux at all, quite the opposite actually because many have the impression of Linux in exactly that way.
So something like this would have to have a huge asterisk and constant clarification that this is “not the general state of Linux”
I had the pleasure recently to create an ffmpeg command to transcode a video into HEVC 10bit with quicksync.
I had tha previously running completely fine on my Nvidia GPU. You would think that it would just be replacing the parameter which device or hardware acceleration to use.
Yeah, turns out that there are like 4 ways to set the quality value of the transcoded output, CRF didn’t work for some reason with quick sync so you need to use global quality or something. I spend days on this trying to figure this out, DAYS.
It is a very powerful tool but every time I have to use it, it is too complicated and I have to spend hours or days to get it working.
Yeah. The general speed that you set isn’t necessarily the speed that your printer will print at. That might be the max speed you might get in the best situation or location.
For example, depending on the settings, first layer, outer walls, bridges and other parts of the model cann all be printed at a lower speed to preserve quality. Your print head also needs to accelerate and decelerate for every corner so that it doesn’t overshoot and go where it should. So low acceleration/deceleration play also a part. And the model itself has to be considered in this too because long, mostly straight lines can accelerate to that speed and stay on it for longer.
So what you set as “speed” in the slicer is mostly not what you actually get. Some slicers have a speed display with a colour gradient after you sliced it so that you can see which parts are faster or slower.
The only thing you can really do about it is to do test prints and slowly push the speed up as far as you can to get a decent quality at a nice speed. But you can still end up in parts where you would be fairly slow.
So this is just for the “looks” or am I missing something here?
Doesn’t seem to do anything for adhesion which I wouldn’t consider to be a replacement as the title implies it is…
Unless, of course, you are looking for a different bottom surface finish.
Yes, blind optimism is the way to go here. /s
I am sorry but if any gaming journalist is not the least amount of sceptical about ANY release today, then they either don’t play games or are sleeping under a rock.
Without a doubt, Hello Games pulled NMS around and made it into a great title but this took years and we also have seen this blind optimism before with Cyberpunk 2077. Even a “wiser” Game studio can fail and not deliver.
Too many titles over the last years were lukewarm even highly anticipated and hyped titles either were “meh” or failed at release. The number of games that redeemed themselves is only a few and can be probably counted on one hand. A gaming Journalist should know about this!
So, I am not even sorry if I am not hyped about it. It does sound interesting but “I believe it when I see it”. There is too much time that has to go down the road for this to come out and there are a lot of things that can/will go wrong in that time.
I rather wait on the reviews.
Just vote with your wallet
But that is the thing, they do vote with their wallet. They still buy the games.
“Voting with the wallet” goes both ways.
As long as people pay for it and they make massive profits through it.
I mean, look at the last situation in which netflix addressed account sharing. Their user number actually increased because of it from what I have read.
Those people that can’t afford it will most likely switch to a less expensive tier and then probably see ads. I have seen that recently with my father who wasn’t even bothered or annoyed by the constant ads while watching a single episode.
Yes, something like this I was thinking about. A boom arm or pole or something like that would then reach over the printer and the retractable badge holders could hold the cables and feed tube up without interfering with them that much.
I specifically moved the filament feed tube to the front so that the whole thing is more accessible and easier to handle, by default the whole stuff is at the end but I found it too annoying to always have to grab/reach through my printer under the bed to do anything with the filament.
I did try using a spare PTFE tube for the cables but this didn’t really help that much. But I must say, I have fewer issues with the cables, the filament feed tube is more of an issue I want to address.
Yeah, I have seen this and played with that Idea for a while but never really could find something that would fit or work with how my setup is constructed. Since I have an Exoslide, custom shroud and so on, those Cable Chains are mostly designed for stock parts.
And I am by far not skilled enough to make the adjustments or remix those things myself.
Even worse is that it is a trademark. There was a kickstarter for a game “prey for the gods” which could have gotten a trademark dispute over the usage of the name “prey” from bethesda.
So they changed the name to “praey for the gods” to not have to deal with yearlong legal battle and burn the Kickstarter funds.