Balcony solar panels can save 30% on a typical household’s electricity bill and, with vertical surface area in cities larger than roof space, the appeal is clear
I am sorry, but your ideas about how these things work are ignoring a lot of issues.
First of all you have significant losses in the distribution grid. This is minimized the higher your voltage is, which is why longer range grids run on 110 kV and more. Then you have an intermediate level, typically 20 kV. Finally you get your local distribution with 220/230V. Also “current flowing the other way” does not exist in AC, because the “direction” changes 50x per second.
Then you only have a limited transportation capacity, so moving a lot of electricity from a central plant of course costs a lot of investment and maintenance. The idea that “Transporting it is for all intents and purposes free” is completely out of touch with the reality of the electrical grid.
But it gets worse. The more producers and consumers you have, the more you will need to balance fluctuations in production and consumption. This is why traditional grids were built around having a high baseload, with incentivizing high demand industries to connect, stabilizing demand. For renewables this is completely different, because renewabls will fluctuate. So the more energy you run through the centralized grid, the more short and medium term storages you will need to provide and the more investment and running costs you will have.
You mention this with there being too much production on the local grid and then in another place also needing to react to this. This is not a problem exclusive to local grids. It is a problem for any level of the grid with integrating renewables. Note how the article also mentions the limit of 800W without requiring a permit.
Finally in the long term we need to make the demand more flexible to production. So if the sun shines and the wind blows, household appliances should run, the fridge should cool a bit stronger, and the water heater heats up for the evening shower… Having a responsive demand with millions of agents can easily lead to overshooting, so that the demand spikes up far beyond supply, because every consumer reacts at the same time and it doesn’t temper out.
This problem is much smaller, if every household can directly see their own production and consumption and already limit how much excess goes into, or is demanded.
So microgeneration is part of the solution and not a problem like you make it out to be.
I am sorry, but your ideas about how these things work are ignoring a lot of issues.
First of all you have significant losses in the distribution grid. This is minimized the higher your voltage is, which is why longer range grids run on 110 kV and more. Then you have an intermediate level, typically 20 kV. Finally you get your local distribution with 220/230V. Also “current flowing the other way” does not exist in AC, because the “direction” changes 50x per second.
Then you only have a limited transportation capacity, so moving a lot of electricity from a central plant of course costs a lot of investment and maintenance. The idea that “Transporting it is for all intents and purposes free” is completely out of touch with the reality of the electrical grid.
But it gets worse. The more producers and consumers you have, the more you will need to balance fluctuations in production and consumption. This is why traditional grids were built around having a high baseload, with incentivizing high demand industries to connect, stabilizing demand. For renewables this is completely different, because renewabls will fluctuate. So the more energy you run through the centralized grid, the more short and medium term storages you will need to provide and the more investment and running costs you will have.
You mention this with there being too much production on the local grid and then in another place also needing to react to this. This is not a problem exclusive to local grids. It is a problem for any level of the grid with integrating renewables. Note how the article also mentions the limit of 800W without requiring a permit.
Finally in the long term we need to make the demand more flexible to production. So if the sun shines and the wind blows, household appliances should run, the fridge should cool a bit stronger, and the water heater heats up for the evening shower… Having a responsive demand with millions of agents can easily lead to overshooting, so that the demand spikes up far beyond supply, because every consumer reacts at the same time and it doesn’t temper out.
This problem is much smaller, if every household can directly see their own production and consumption and already limit how much excess goes into, or is demanded.
So microgeneration is part of the solution and not a problem like you make it out to be.