Background story: A couple of days ago, my Minisforum HM90, which was running Proxmox 7 at the time, started to randomly lock up. While the hardware itself seemed to be powered on, the software wasn’t responding. After two days of troubleshooting, updating, switching to another distribution, changing RAM and SSDs and sometimes getting logs, and sometimes not getting logs at all, I was fed up and ready to never buy hardware from Minisforum again.
So I emailed the support, describing my situation and requesting a new device. Luckily, my HM90 was still within their 2-year warranty. Some Google searches brought up that they would most likely need to replace the device as there was no real solution.
48 hours later, I received an email asking me to change some BIOS settings. So far, everything has been up and running for 20 hours without issues. Compared to crashes every 90 minutes on average, that seems like a significant improvement.
Settings:
Deactivate the following in the BIOS
Advanced/AMD CBS/CPU Common Option/Core Performance Boost
Hopefully, this will be helpful to someone facing a similar situation.
You must log in or # to comment.
This post will save someone desperate one day. Thanks for sharing
Shouldn’t this solution ncome with some performance hit?
Core performance boost is like inbuilt overclocking. When you disable it, you’ll get normal performance, and the temperature should be lower as well.
Thanks for sharing, I have 3 hm90s I’m about to set up ( just waiting for RAM and SSDs ), these crashes sound super frustrating.
I was planning to run them detuned anyway to reduce the strain and temperature on the Power Supply, since its a non-standard USB-C which looks hard or impossible to replace if it breaks some years from now
This kind of BS is why I buy second hand HP Mini units.
