• charles@poptalk.scrubbles.techOP
          link
          fedilink
          English
          arrow-up
          10
          arrow-down
          1
          ·
          1 year ago

          Weird downvotes, but ok. It was $5, which is far less than I’d spend on filament prototyping it, let alone time considerations.

          • roofuskit@kbin.social
            link
            fedilink
            arrow-up
            3
            ·
            1 year ago

            The great thing about kbin and lemmy is you can see who down-voted you. It definitely wasn’t me. I was just joking around about spending money on stls.

            • Cris@lemm.ee
              link
              fedilink
              English
              arrow-up
              4
              ·
              edit-2
              1 year ago

              As someone who only ever accesses lemmy with jerboa, I had no idea that info was visible, thank you for mentioning that

              So if I go to the web interface I can see upvotes and down votes? Is it only visible for my posts and comments?

              • atocci@kbin.social
                link
                fedilink
                arrow-up
                3
                ·
                edit-2
                1 year ago

                It’s a bit weird. Only Kbin has the functionality built in to see who is giving upvotes or downvotes. The information is technically public on Lemmy too because of how federation works, there’s just no way to see it in the web UI or apps.

                There’s a problem though. Downvotes don’t federate between Lemmy and Kbin, so we can only ever see downvotes from other Kbin users here. If someone on Lemmy downvotes something, I’d never even see the count change and wouldn’t be able to see who did it.

                Edit: from my view, no comments in this thread have any downvotes.

                • charles@poptalk.scrubbles.techOP
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  1 year ago

                  Weird, and good to know.

                  There’s a Lemmy contingent who feels that nothing digital should ever be paid for, and communicate this through downvotes. I also felt this way when I was a teen, but being in a position to support creators voluntarily is something that I take great pride in now.

    • huginn@feddit.it
      link
      fedilink
      English
      arrow-up
      18
      arrow-down
      1
      ·
      1 year ago

      This is the 3d printing sub. He bought the printable model then printed it. He probably had some artifacts that needed sanding/clipping due to print issues.

    • Magrath@lemmy.ca
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      That’s how prints look on the bottoms when they have supports under them.

  • BT_7274@lemmy.world
    link
    fedilink
    English
    arrow-up
    7
    ·
    edit-2
    1 year ago

    I just printed this out as well! So much better than the button. Though having a grey lever in a white fridge isn’t doing it for me. That’s a good enough excuse to go buy some new filament!

    I do think it would be better to print it on the opposite side than what he shows in his screenshots. That way the rougher side where the support material attaches will be facing the inside of the fridge.

    • charles@poptalk.scrubbles.techOP
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      Yeah that would make total sense lol. I’ll reprint when I get some white filament and print with the other side down. No idea why I didn’t think of it.

      One other printing tip: pull the z of the model down a few layers. The way it is modeled has the plate touched by only a single point. Pulling it down and making (what should be the right side, but I printed left) of the lever flat gave me better bed adhesion.

  • CADmonkey@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    arrow-down
    1
    ·
    1 year ago

    I consider myself fortunate. Basically any mechanical or structural thing I could want, I can just sit down and design something. Maybe I need to sell models.

    • charles@poptalk.scrubbles.techOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      You definitely should. I can design well enough for random BS, but can’t be bothered to perfect something. $5 is well worth the time saved for me.

  • SokathHisEyesOpen@lemmy.ml
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    Teach me oh wise and mighty one! Or just give me the STL, because I have this same refrigerator and it’s the stupidest design on the planet.

    • charles@poptalk.scrubbles.techOP
      link
      fedilink
      English
      arrow-up
      5
      ·
      1 year ago

      It’s $10 on Etsy, but I left it in my cart overnight and got a coupon for 50% off. It would be completely unethical for you to DM me and ask me for a link to a direct download and for me to provide that link.

  • swag_money@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    1
    ·
    1 year ago

    be a buddy and share the model? i have the same dispenser in my fridge and the button sucks :p

    • charles@poptalk.scrubbles.techOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      It’s $10 on Etsy, but I left it in my cart overnight and got a coupon for 50% off. It would be completely unethical for you to DM me and ask me for a link to a direct download and for me to provide that link.